Q 1.
Your network contains a single Active Directory site. You have a server named Server1 that runs Windows Server 2008. Server1 is a DHCP server for the network.
You need to plan the automated deployment of operating systems. Your plan must meet the following requirements:
Support Windows Vista deployments
Support Windows Server 2008 deployments
Support computers that start from a Pre-boot Execution Environment (PXE) network adapter
Minimize the number of servers installed
What should you include in your plan?
A. Deploy Windows Automated Installation Kit (WAIK) on Server1.
B. Deploy Windows Automated Installation Kit (WAIK) on a new server.
C. Deploy the Windows Deployment Services (WDS) server role on Server1.
D. Deploy the Windows Deployment Services (WDS) server role on a new server.
正確答案: C
重點 1 : Support computers that start from a Pre-boot Execution Environment (PXE) network adapter
重點 2 : Minimize the number of servers installed
WAIK係不支援PXE network adapter
因要配合重點2, 所以把WDS安裝到Server 1
綜合以上二點，所以答案係C。
關於 WDS 可參考：http://vysf.blogspot.com/2012/02/windows-deployment-services.html
關於 WAIK 可參考：http://vysf.blogspot.com/2012/02/windows-automated-installation-kit.html
Q 2.
Your network contains a single Active Directory site.
You plan to deploy 1,000 new computers that will run Windows Vista Enterprise Edition. The new
computers have Pre-boot Execution Environment (PXE) network adapters.
You need to plan the deployment of the new computers to meet the following requirements:
Support 50 simultaneous installations of Windows Vista
Minimize the impact of network operations during the deployment of the new computers
Minimize the amount of time required to install Windows Vista on the new computers
What should you include in your plan?
A. Deploy the Windows Deployment Services (WDS) server role. Configure the IP Helper tables on all routers.
B. Deploy the Windows Deployment Services (WDS) server role. Configure each WDS server by using legacy mode.
C. Deploy the Windows Deployment Services (WDS) server role and the Transport Server feature.
Configure the Transport Server to use a custom network profile.
D. Deploy the Windows Deployment Services (WDS) server role and the Transport Server feature.
Configure the Transport Server to use a static multicast address range.
正確答案: D
重點 1 :
重點 2 :
綜合以上二點，所以答案係D。
Q 3.
Your network has a DHCP server that runs the 64-bit version of Windows Server 2008. The network only uses IPv4.
You plan to deploy 50 new Windows Server 2008 servers. Some of the new servers contain 64-bit
hardware and some of the servers contain 32-bit hardware. All of the new server hardware supports Pre-Boot Execution Environment (PXE).
You need to plan for the automated deployment of the new servers. You want to achieve this goal while minimizing hardware costs.
What should you include in your plan?
A. Deploy Windows Deployment Services (WDS) on the DHCP server.
B. Deploy Remote Installation Services (RIS) on a 64-bit server that runs Windows Server 2003.
C. Deploy Windows Deployment Services (WDS) on two servers that run Windows Server 2008. One of the servers is a 64-bit server, and the other server is a 32-bit server.
D. Deploy Remote Installation Services (RIS) on two servers that run Windows Server 2003 Service Pack 2. One of the servers is a 64-bit server, and the other server is a 32-bit server.
正確答案: A
重點 1 : automated deployment of the new servers
重點 2 : minimizing hardware costs
為符合重點1，所以要用WDS
為符合重點2，所以把WDS安裝在已經存在的Server上
綜合以上二點，所以答案係A。
Q 4.
Your company has 250 branch offices. Your network contains an Active Directory domain. The domain controllers run Windows Server 2008.
You plan to deploy Read-only Domain Controllers (RODCs) in the branch offices.
You need to plan the deployment of the RODCs to meet the following requirements:
Build each RODC at the designated branch office.
Ensure that the RODC installation source files do not contain cached secrets.
Minimize the bandwidth used during the initial synchronization of Active Directory Domain Services (ADDS).
What should you include in your plan?
A. Use Windows Server Backup to perform a full backup of an existing domain controller. Use the backup to build the new RODCs.
B. Use Windows Server Backup to perform a custom backup of the critical volumes of an existing domain controller. Use the backup to build the new RODCs.
C. Create a DFS Namespace that contains the Active Directory database from one of the existing domain controllers. Build the RODCs by using an answer file.
D. Create an RODC installation media. Build the RODCs from the RODC installation media.
正確答案: D
重點 1 : Ensure that the RODC installation source files do not contain cached secrets
重點 2 : Minimize the bandwidth used during the initial synchronization of Active Directory Domain Services
利用RODC installation media, 既可以減少網路上的流量, 亦可以避免不必要的檔案存在
所以答案係D。
Q 5.
Your network consists of a single Active Directory forest that contains multiple domains. The domain controllers run Windows Server 2008 and have the DNS role installed.
For name resolution, you plan to replace a legacy Windows Internet Name Service (WINS) environment with a DNS-only environment.
You need to plan the infrastructure for name resolution to meet the following requirements:
Support IPv4 and IPv6 environments
Allow single-label name resolution across all domains
Minimize the amount of NetBIOS over TCP/IP (NetBT) traffic on the network
What should you include in your plan?
A. Configure a GlobalNames zone on each domain controller.
B. Modify each DNS zone to perform a WINS forward lookup.
C. Configure each DNS zone to replicate to each DNS server in the forest.
D. Modify each DNS zone to replicate as part of a custom Active Directory replication partition.
正確答案: A
重點 1 :
重點 2 :
綜合以上二點，所以答案係A。